SILISIL Silicone Oil 3000 cSt
SILISIL Silicone Oil 3000 cSt — High-viscosity PDMS for specialized lubrication, damping, and maintenance applications, available from our Swiss warehouse.
High-viscosity PDMS for specialized lubrication, damping, and maintenance applications
SILISIL Silicone Oil 3000 cSt is a high-viscosity PDMS designed for specialized lubrication, damping, and maintenance applications.
SILISIL Silicone Oils are high-purity linear polydimethylsiloxane (PDMS) fluids with 100% purity. Their viscosity of 3,000 cSt defines their range of applications—from lubrication, release agents, and hydraulic functions to specialized care and industrial applications.
3,000 cSt bridges the gap between 1,000 and 5,000 cSt—offering greater lubricant film stability for specialized industrial applications while still maintaining good flow properties.
What sets SILISIL Silicone Oil 3000 cSt apart
What is SILISIL Silicone Oil 3000 cSt used for?
Important information
Which viscosity for which application?
SILISIL Silicone Oil 3000 cSt in direct comparison with similar viscosities in our product range.
3,000 cSt Current Product |
1000 cSt → | 5000 cSt → | 10,000 cSt → | |
|---|---|---|---|---|
| Viscosity (cSt) | 3,000 | 1,000 | 5,000 | 10,000 |
| Main application | Special Lubrication | High-performance industrial lubrication | Industrial dampers | Automotive Vibration Dampers |
Technical Specifications for SILISIL Silicone Oil 3000 cSt
| product information | |
|---|---|
| brand | SILISIL |
| container | 1 kg, 5 kg, 25 kg |
| network type | Not reactive |
| Physical properties | |
|---|---|
| Viscosity (cSt) | 3,000 cSt |
| Density (g/cm³) | 0.973 g/cm³ |
| Paint cured | Transparent |
| Electrical Properties | |
|---|---|
| Electrical insulation | Yes |
| Thermal Properties | |
|---|---|
| Flash point (°C) | >300 °C |
| Freezing point (°C) | -48 °C |
| product approvals | |
|---|---|
| Certificates | RoHS, REACH |
| food contact | No |
| Suitable for medical use | No |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
No public documents available.
Upon request, we will be happy to send you the TDS and SDS via email. Please submit a request.
Frequently Asked Questions About SILISIL Silicone Oil 3000 cSt
Practical questions regarding application and design — answered by SILITECH.
SILISIL Silicone Oil 3000 cSt: High-viscosity PDMS for specialized lubrication, damping, and maintenance applications. Primary applications include specialized lubrication, premium hydraulic damping, and professional-grade release agents.
PDMS (polydimethylsiloxane) is a linear silicone fluid that combines high thermal stability, low surface tension, excellent dielectric properties, and a wide temperature range. Viscosity (measured in centistokes, cSt) determines the field of application—low viscosities are suitable for fluid applications and lubrication, while high viscosities are suitable for damping and conditioning.
SILISIL silicone oils are soluble in aromatic, aliphatic, and chlorinated solvents (e.g., toluene, xylene, hexane, diesel). They are immiscible with water and alcohols. For anti-foaming applications, high-viscosity PDMS is diluted in hydrocarbon solvents and introduced using a metering pump.
Store in the unopened original container at room temperature (ideally below 60 °C). Avoid contact with eyes. SILISIL Silicone Oils are generally non-toxic, odorless, and tasteless—however, please consult the Safety Data Sheet (SDS), which is available in the "Documents" tab.
Viscosity determines the application. 3,000 cSt is ideal for: specialized lubrication and similar applications. For other application characteristics, please refer to the comparison table above for related viscosities—if you have any questions, we would be happy to advise you on your specific application.
Can't find your question here?
Our technical team will provide you with personalized advice on material selection, processing issues, and specific requirements. Quickly and professionally.
product specifications
| product information | |
|---|---|
| container | 1 kg or 5 kg or 25 kg |
| brand | SILISIL |
| network type | Not reactive |
| Physical properties | |
|---|---|
| Viscosity (cSt) | 3,000 cSt |
| Density (g/cm³) | 0.973 g/cm³ |
| Paint cured | Transparent |
| Electrical Properties | |
|---|---|
| Electrical insulation | Yes |
| Thermal Properties | |
|---|---|
| Flash point (°C) | >300 °C |
| Freezing point (°C) | -48 °C |
| product approvals | |
|---|---|
| Certificates | RoHS or REACH |
| food contact | No |
| Suitable for medical use | No |
| keywords | |
|---|---|
| keywords | |