SILISIL RTV PC-Soft 10
SILISIL RTV PC-Soft 10 — 2-component addition-curing silicone rubber (platinum), Shore A 10, transparent, cleanroom-compatible, platinum-cured.
SILISIL RTV PC-Soft 10 — Platinum-cured, Shore A 10.
Transparent, cleanroom-compatible, platinum-cured. Shipped from our Swiss warehouse with SDS and TDS.
HS code:
3910.0000
SILISIL RTV PC-Soft 10 — Platinum-Cured (Shore A 10)
SILISIL RTV PC-Soft 10 is a two-component addition-curing silicone from the SILISIL Platinum Cast series. Thanks to its platinum-based curing mechanism, the system is highly transparent, leaves no residue, and is particularly suitable for applications requiring optical clarity, close skin contact, or food-grade properties.
With a Shore A hardness of 10, the product falls into the category of very soft silicones (skin simulation, gel impressions, podiatry).
product benefits
- 2K addition system with a precisely calibrated mixing ratio
- Shrink-resistant and dimensionally stable even after prolonged storage
- High tear strength and tear propagation resistance
- Excellent detail reproduction, even at the microscopic level
- Long service life when installed properly
- Compatible with standard casting and impression materials
Typical applications
- Optics / Fiber Optics: Casting of optical components, lenses, and transparent prototypes
- LED / Electronics: Encapsulation of electronic components with high dielectric strength
- Jewelry and Arts and Crafts: Clear Molds for Acrylic and Epoxy Resin Casting
- Putty / Stamping Technique: Hand-moldable impression material for the finest surfaces
- Prototyping: Dense, low-shrinkage castings with precise detail reproduction
- Product Tests: Prototypes with High Optical Transparency
Processing and Mixing
- For the exact mixing ratio, pot life, and demolding time, please refer to the technical data sheet (TDS) on this product page
- Before use, stir both components separately and then mix them thoroughly in the specified ratio
- Degassing under vacuum (30–50 mbar) removes air pockets and improves surface quality
- Apply ideally at 23 °C and 40–60% relative humidity
- Contamination from sulfur, amines, tin catalysts, or PVC must be avoided in platinum-cured systems—they prevent curing
Storage and shelf life
- Store in the unopened original container at 5–25 °C, in a dry place and protected from direct sunlight
- Shelf life from the date of manufacture as specified in the TDS — typically 12–24 months
- Close tightly after opening
Included documentation
- Technical Data Sheet (TDS) in German, English, and French
- Safety Data Sheet (SDS) under REACH
- Batch certificate upon request
SILISIL RTV PC-Soft 10 is tested and packaged by SILITECH AG in Switzerland. Our silicone specialists are always available to assist you with advice on the appropriate Shore hardness, choosing between the various SILISIL series, or formulation development.
Frequently Asked Questions About SILISIL RTV PC-Soft 10
The most important answers regarding applications, processing, and availability.
SILISIL RTV PC-Soft 10 is a two-component addition-curing silicone rubber (platinum-cured) with a Shore A hardness of 10 and is primarily used in applications in the fields of optics/fiber optics, LEDs/electronics, jewelry, and arts and crafts.
SILISIL RTV PC-Soft 10 is a platinum-cured sealant. Please refer to the technical data sheet (TDS) on this product page for the relevant application and storage instructions, as well as the mixing ratio. The exact specifications are also listed as product attributes and can be filtered in the shop.
SILISIL RTV PC-Soft 10 is designed for the industrial applications listed above. For regulated applications (skin contact, food, medical), please refer to the specific SILISIL MD and CT-Body product lines, as well as the relevant certificates in the SDS.
SILISIL RTV PC-Soft 10 is available as standard in various container sizes from our Swiss warehouse—ranging from sample containers for preliminary testing to industrial-sized containers for mass production. The exact container sizes are listed as product variants on this page. For quantities outside the standard range, please contact our sales department.
Consulting, Samples, and Project Quotes
Not sure which SILISIL grade or Shore hardness to choose? Our silicone specialists at SILITECH are happy to provide you with non-binding advice—both technical and regarding pricing. We’re happy to supply sample quantities for preliminary testing. Submit your inquiry now.
product specifications
| Physical properties | |
|---|---|
| Paint cured | Transparent |
| Self-leveling | Yes |
| product information | |
|---|---|
| container | 1 kg or 5 kg or 25 kg or 50 kg or 200 kg |
| network type | Addition (Platinum) |
| brand | SILISIL |
| product approvals | |
|---|---|
| Certificates | RoHS or REACH |
| food contact | No |
| Suitable for medical use | No |
| Areas of application | |
|---|---|
| Main application | Electronics encapsulation or Prototyping or LED / Optoelectronics |
| Electrical Properties | |
|---|---|
| Electrical insulation | Yes |
| Uncategorized | |
|---|---|
| Shore A hardness (cured) | A 10 |
| keywords | |
|---|---|
| keywords | |