SILISIL RTV PC Putty 30 BASE
SILISIL RTV PC-Putty 30 BASE — 2K-Addition-Silikonkautschuk (Platin) Shore A 30, transparent, reinraumfähig, platinvernet.
SILISIL RTV PC-Putty 30 BASE — Platin-Cast Shore A 30.
Transparent, cleanroom-compatible, platinum-cured. Shipped from our Swiss warehouse with SDS and TDS.
HS code:
3910.0000
SILISIL RTV PC-Putty 30 BASE — Platin-Cast (Shore A 30)
SILISIL RTV PC-Putty 30 BASE ist ein 2K-Additionssilikon der SILISIL Platin-Cast-Reihe. Durch die platin-basierte Vernetzung ist das System hochtransparent, restefrei und eignet sich besonders für Anwendungen, in denen optische Klarheit, enger Hautkontakt oder Food-Grade-ähnliche Eigenschaften gefragt sind..
Special features of this variant: Thixotropic / Putty: stays in place on vertical surfaces, does not run.
A Shore A hardness of 30 places the product in the category of soft silicones (flexible molds, skin simulation).
product benefits
- 2K addition system with a precisely calibrated mixing ratio
- Shrink-resistant and dimensionally stable even after prolonged storage
- High tear strength and tear propagation resistance
- Excellent detail reproduction, even at the microscopic level
- Long service life when installed properly
- Compatible with standard casting and impression materials
Typical applications
- Optics / Fiber Optics: Casting of optical components, lenses, and transparent prototypes
- LED / Electronics: Encapsulation of electronic components with high dielectric strength
- Jewelry and Arts and Crafts: Clear Molds for Acrylic and Epoxy Resin Casting
- Putty / Stamping Technique: Hand-moldable impression material for the finest surfaces
- Prototyping: Dense, low-shrinkage castings with precise detail reproduction
- Product Tests: Prototypes with High Optical Transparency
Processing and Mixing
- For the exact mixing ratio, pot life, and demolding time, please refer to the technical data sheet (TDS) on this product page
- Before use, stir both components separately and then mix them thoroughly in the specified ratio
- Degassing under vacuum (30–50 mbar) removes air pockets and improves surface quality
- Apply ideally at 23 °C and 40–60% relative humidity
- Contamination from sulfur, amines, tin catalysts, or PVC must be avoided in platinum-cured systems—they prevent curing
Storage and shelf life
- Store in the unopened original container at 5–25 °C, in a dry place and protected from direct sunlight
- Shelf life from the date of manufacture as specified in the TDS — typically 12–24 months
- Close tightly after opening
Included documentation
- Technical Data Sheet (TDS) in German, English, and French
- Safety Data Sheet (SDS) under REACH
- Batch certificate upon request
SILISIL RTV PC-Putty 30 BASE wird von SILITECH AG in der Schweiz geprüft und konfektioniert. Für Beratung zur passenden Shore-Härte, zur Wahl zwischen den verschiedenen SILISIL-Reihen oder zur Formulierungsentwicklung stehen Ihnen unsere Silikon-Spezialisten jederzeit zur Verfügung.
Häufige Fragen zu SILISIL RTV PC-Putty 30 BASE
The most important answers regarding applications, processing, and availability.
SILISIL RTV PC-Putty 30 BASE ist ein 2K-Addition-Silikonkautschuk (Platin) mit einer Shore-Härte A von 30 und wird vor allem für Anwendungen im Bereich Optik / Lichtleiter, LED / Elektronik, Schmuck- und Kunsthandwerk eingesetzt.
SILISIL RTV PC-Putty 30 BASE basiert auf Platin-Addition. Die entsprechenden Verarbeitungs- und Lagerungshinweise sowie das Mischungsverhältnis entnehmen Sie bitte dem technischen Datenblatt (TDS) auf dieser Produktseite. Die exakten Kennwerte sind zusätzlich als Produktattribute hinterlegt und im Shop filterbar.
SILISIL RTV PC-Putty 30 BASE ist für die oben genannten Industrieanwendungen konzipiert. Für regulierte Anwendungen (Hautkontakt, Lebensmittel, Medizin) beachten Sie bitte die spezifischen Produktlinien SILISIL MD und CT-Body sowie die entsprechenden Zertifikate im SDS.
SILISIL RTV PC-Putty 30 BASE ist standardmäßig in verschiedenen Gebindegrössen ab Schweizer Lager verfügbar — von Mustergebinden für Vorversuche bis hin zu Industriegebinden für die Serienproduktion. Die genauen Abfüllungen sind als Produktvarianten auf dieser Seite aufgelistet. Für Mengen ausserhalb des Standards kontaktieren Sie bitte unseren Vertrieb.
Consulting, Samples, and Project Quotes
Not sure which SILISIL grade or Shore hardness to choose? Our silicone specialists at SILITECH are happy to provide you with non-binding advice—both technical and regarding pricing. We’re happy to supply sample quantities for preliminary testing. Submit your inquiry now.
product specifications
| Physical properties | |
|---|---|
| Paint cured | Transparent |
| Self-leveling | Thixotropic |
| product information | |
|---|---|
| container | 1 kg or 5 kg or 25 kg |
| brand | SILISIL |
| network type | Addition (Platinum) |
| product approvals | |
|---|---|
| Certificates | RoHS or REACH |
| food contact | No |
| Suitable for medical use | No |
| Areas of application | |
|---|---|
| Main application | Electronics encapsulation or Prototyping or LED / Optoelectronics |
| Electrical Properties | |
|---|---|
| Electrical insulation | Yes |
| Uncategorized | |
|---|---|
| Shore A hardness (cured) | A 30 |
| keywords | |
|---|---|
| keywords | |