SILISIL RTV MD-Soft 0020
SILISIL RTV MD-Soft 0020 — Medical Dental-Silikon, Shore A 20, platinvernetzend, ab Schweizer Lager.
SILISIL RTV MD-Soft 0020 — Medical Dental Shore A 20.
Gentle on the skin, dermatologically tested, platinum-crosslinked. Shipped from our Swiss warehouse with SDS and TDS.
HS code:
3910.0000
SILISIL RTV MD-Soft 0020 — Medical Dental (Shore A 20)
SILISIL RTV MD-Soft 0020 is a skin-friendly, platinum-curing two-component silicone compound from the SILISIL Medical-Dental series. The formulation is specifically optimized for direct skin contact and is widely used in dental laboratories, orthopedic technology, prosthetics, and special effects production.
A Shore A hardness of 20 places the product in the category of soft silicones (flexible molds, skin simulation).
product benefits
- 2K addition system with a precisely calibrated mixing ratio
- Shrink-resistant and dimensionally stable even after prolonged storage
- High tear strength and tear propagation resistance
- Excellent detail reproduction, even at the microscopic level
- Long service life when installed properly
- Compatible with standard casting and impression materials
Typical applications
- Dental Technology: Precision Impressions of Teeth and Dental Conditions
- Orthopedics: Impressions for prostheses, orthotic insoles, and joint fittings
- Podiatry: Footprints and Custom Shoe Insoles
- Special Effects / Film: Skin casts for masks, prosthetics, and FX makeup
- Hörakustik: Ear impressions for custom-fit hearing protection and hearing aids
- Laboratory and Prototyping: Medical Demonstration Models and Training Simulators
Processing and Mixing
- For the exact mixing ratio, pot life, and demolding time, please refer to the technical data sheet (TDS) on this product page
- Before use, stir both components separately and then mix them thoroughly in the specified ratio
- Degassing under vacuum (30–50 mbar) removes air pockets and improves surface quality
- Apply ideally at 23 °C and 40–60% relative humidity
- Contamination from sulfur, amines, tin catalysts, or PVC must be avoided in platinum-cured systems—they prevent curing
Storage and shelf life
- Store in the unopened original container at 5–25 °C, in a dry place and protected from direct sunlight
- Shelf life from the date of manufacture as specified in the TDS — typically 12–24 months
- Close tightly after opening
Included documentation
- Technical Data Sheet (TDS) in German, English, and French
- Safety Data Sheet (SDS) under REACH
- Batch certificate upon request
SILISIL RTV MD-Soft 0020 is tested and manufactured by SILITECH AG in Switzerland. Our silicone specialists are always available to assist you with advice on the appropriate Shore hardness, choosing between the different SILISIL series, or formulation development.
Technische Daten zu SILISIL RTV MD-Soft 0020
| product information | |
|---|---|
| brand | SILISIL |
| network type | Addition (Platinum) |
| container | 1 kg + 1 kg, 5 kg + 5 kg, 10 kg + 10 kg, 25 kg + 25 kg |
| Areas of application | |
|---|---|
| Main application | Medizintechnik, Dental, Prototyping |
| Physical properties | |
|---|---|
| Paint cured | Skin color |
| Self-leveling | Yes |
| Electrical Properties | |
|---|---|
| Electrical insulation | Yes |
| product approvals | |
|---|---|
| Certificates | RoHS, REACH |
| food contact | No |
| Suitable for medical use | Yes |
| General | |
|---|---|
| Density (g/cm³) | 0.95 |
| Shore-Härte 00 (ausgehärtet) | 00 23 |
| Viskosität unvernetzt (mPa·s) | 5200 |
| mixing ratio | 1:1 |
| Pot life (min) | 25 |
| Entformzeit (min) | 70 |
| Vollvernetzung (h) | 24 |
| Tensile strength (MPa) | 1.2 |
| Elongation at break (%) | 770 |
| Reißfestigkeit (N/mm) | 3.5 |
Verbindliche Werte entnehmen Sie bitte dem technischen Datenblatt (TDS) im Tab "Dokumente".
Frequently Asked Questions About SILISIL RTV MD-Soft 0020
The most important answers regarding applications, processing, and availability.
SILISIL RTV MD-Soft 0020 ist ein Medical Dental-Silikon mit Shore-Härte A 20 und wird vor allem für Dentaltechnik, Orthopädie und Hörakustik eingesetzt.
SILISIL RTV MD-Soft 0020 ist ein Medical Dental-System, auf Basis platinvernetzender 2K-Addition, Mischungsverhältnis 1:1, Topfzeit ca. 25 Minuten bei 23 °C, Entformzeit ca. 70 Minuten, Endvernetzung nach 24 Stunden. Die exakten Werte sind als Produktattribute hinterlegt und im Shop filterbar.
SILISIL RTV MD-Soft 0020 hat folgende mechanische und physikalische Kennwerte (gemäß TDS, gemessen bei 23 °C): Zugfestigkeit 1.2 N/mm², Bruchdehnung 770 %, Reißfestigkeit (Die B) 3.5 N/mm, Dichte 0.95 g/cm³, Viskosität (unvernetzt) 5200 mPa·s. Das Produkt ist hautverträglich und für medizintechnische Anwendungen geeignet.
SILISIL RTV MD-Soft 0020 ist ab Schweizer Lager in verschiedenen Gebindegrössen verfügbar — die genauen Abfüllungen sind als Produktvarianten auf dieser Seite aufgelistet. Für Mengen ausserhalb des Standards oder Mustermengen kontaktieren Sie unseren Vertrieb.
Ihre Frage nicht dabei?
Unser Technik-Team berät Sie persönlich bei Materialauswahl, Verarbeitungsfragen und individuellen Anforderungen — schnell und kompetent.
product specifications
| product information | |
|---|---|
| container | 1 kg + 1 kg or 5 kg + 5 kg or 10 kg + 10 kg or 25 kg + 25 kg |
| brand | SILISIL |
| network type | Addition (Platinum) |
| Areas of application | |
|---|---|
| Main application | Medical technology or Dental or Prototyping |
| Physical properties | |
|---|---|
| Paint cured | Skin color |
| Self-leveling | Yes |
| Electrical Properties | |
|---|---|
| Electrical insulation | Yes |
| product approvals | |
|---|---|
| Certificates | RoHS or REACH |
| food contact | No |
| Suitable for medical use | Yes |
| Uncategorized | |
|---|---|
| Density (g/cm³) | 0.95 |
| Shore-Härte 00 (ausgehärtet) | 00 23 |
| Viskosität unvernetzt (mPa·s) | 5200 |
| mixing ratio | 1:1 |
| Pot life (min) | 25 |
| Entformzeit (min) | 70 |
| Vollvernetzung (h) | 24 |
| Tensile strength (MPa) | 1.2 |
| Elongation at break (%) | 770 |
| Reißfestigkeit (N/mm) | 3.5 |
| keywords | |
|---|---|
| keywords | |
Dokumente und Datenblätter
Sicherheitsdatenblätter (SDS) und technische Datenblätter (TDS) zum Download: