Permabond 2010
Permabond® 2010 is a high-viscosity, thixotropic cyanoacrylate adhesive that cures very quickly and has a relatively high gap-filling capacity.
HS code:
35069190
Permabond® 2010 – Thixotropic cyanoacrylate adhesive for porous and vertical applications
Permabond® 2010 is a single-component, medium-viscosity cyanoacrylate adhesive with thixotropic flow properties. It has been specially developed for applications where the adhesive must not run, e.g., on vertical surfaces or porous materials. Its fast curing and high gap-filling properties make it ideal for bonding a wide variety of materials such as rubber, plastic, metal, and thermosets.
product features
- Thixotropic – no running on vertical surfaces
- Fast curing in 10–15 seconds (depending on material)
- Gap bridging up to 0.5 mm
- Solvent-free, 100% reactive
- Good chemical resistance and impact resistance
- Temperature resistant from -55°C to +80°C (higher for short periods)
Suitable materials
- Elastomers: e.g., NBR (Buna N), EPDM
- Plastics: ABS, PVC, PC (with primer if necessary), also porous materials
- Metals: steel, aluminum, zinc
- Thermosets: e.g., phenolic resins
Typical areas of application
- Bonding of vertical or overhead mounted components
- Fastening rubber or plastic elements to housings
- Porous materials such as ceramics, wood, or textiles
-
Electronics assembly requiring high precision and rapid fixation
Processing instructions
- Apply adhesive sparingly to only one of the two surfaces.
- Align and press parts together precisely in seconds
- Do not move the fixture during curing.
- Use Permabond CSA Activator for difficult surfaces.
- Permabond POP Primer is required for polyethylene, polypropylene, PTFE, or silicone.
-
Remove excess adhesive with Permabond CA Cleaner.
storage
- Recommended storage temperature: 2–7°C
- Protect from sunlight and heat sources
- Bring to room temperature before use.
product specifications
| Physical properties | |
|---|---|
| Color | colorless |
| Chemical group | Ethyl cyanoacrylate |
| Viscosity (adhesives) | High viscosity >5000 mPas |
| Viscosity 20 rpm | 2000-2500 |
| Viscosity 2 rpm | 10,000-20,000 |
| product information | |
|---|---|
| container | 20 g or 50 g or 500 g |
| manufacturer | Permabond Engineering Adhesives Ltd |
| brand | Permabond |
| country of origin | Italy |
| Operating temperature (°C) | -55 to +80 |
| Storage temperature (°C) | 2-7 |
| UFI (Unique Formula Identifier) | 17M0-A02U-C008-UEQD |
| Mechanical properties | |
|---|---|
| Hardness (Shore D) | 85 |
| Shear strength ISO ISO4587 in N/mm² | |
|---|---|
| steel | 19-23 |
| aluminum | 7-9 |
| zinc | 10 |
| ABS | >6 |
| polyvinyl chloride | 5 |
| phenol | 14 |
| PC | >5 |
| curing values | |
|---|---|
| Maximum gap width (mm) | 0.5 |
| Steel strength (sec.) | 10-15 |
| Rubber setting time (sec.) | 10-15 |
| Hand strength Phenol (sec.) | 10-15 |
| ultimate strength | 24 hours |
| Performance at ultimate strength | |
|---|---|
| Impact resistance (ASTM D-950) | 3–5 kJ/m² |
| dielectric strength | 25 kV/mm |
| keywords | |
|---|---|
| keywords | |
Your dynamic snippet will be displayed here...
This message is displayed because you have not provided a filter or template to use.