Permabond 130UV
Permabond® UV130 is a clear, low-viscosity, dual-curing UV adhesive based on cyanoacrylate. It is solvent-free, low-odor, low-blooming, and cures in shaded areas.
documents
HS code:
3506.9190000
Permabond® 130UV – Dual-cure cyanoacrylate adhesive with UV curing
Permabond® 130UV is an innovative, low-viscosity cyanoacrylate adhesive with a dual curing mechanism: UV light and/or air humidity. It was specially developed for applications requiring fast adhesion, minimal outgassing (blooming), and transparent adhesive films—even in shaded areas where UV light cannot fully penetrate.
product features
- UV and moisture curing (dual cure)
- Fluorescent under UV light for quality control
- Härtet in <1 Sekunde bei LED-UV (405 nm)
- Reduced odor & minimal white bloom
- Transparent with a thin adhesive layer
- Excellent adhesion to metals and plastics
- Biocompatible according to ISO 10993-5
-
Solvent-free, low hazard classification
Suitable materials
- Plastics: ABS, PC, PVC, PMMA, PETG, nylon (PA6)
- Rubber: NBR, EPDM
- Metals: stainless steel, aluminum, steel
-
Also suitable for difficult substrates (with primer if necessary)
Typical areas of application
- Bonding transparent components (e.g., displays, PMMA, PC)
- Bonding of components with shadow zones
- Micro-dosed precision bonding
- Applications with optical requirements (tack-free surface)
-
Medical components (biocompatible*)
Processing instructions
- Clean the surface (e.g., with isopropanol or Permabond Cleaner A).
- Apply adhesive thinly to a surface (manually or automatically)
- Align and assemble parts precisely – avoid air pockets
- Apply pressure to achieve even distribution
-
Curing:
- UV light: ≤1 s at 150 mW/cm² (405 nm)
- Humidity: typically 3–30 seconds, depending on the material
- For optimal results: Combination of both curing methods
-
Areas that are not UV-permeable retain residual strength through moisture curing.
Special advantages
- No white blooming (compared to classic CA adhesives)
- Open time allows for precise alignment before UV activation
- UV detection for automated production control
-
Good chemical resistance to water, ethanol, motor oil
storage
- Storage temperature: 2–7°C
- Protect from light – light-sensitive
- Bring to room temperature before use.
*Note: Permabond® 130UV meets the requirements of ISO 10993-5 (cytotoxicity), making it suitable for many medical applications. The user must verify its suitability based on specific requirements.
product specifications
| Physical properties | |
|---|---|
| Color | yellow |
| Chemical group | Ethyl cyanoacrylate |
| Viscosity (adhesives) | Niedrigviskos <500 MPas |
| Viscosity mPa·s | 200 |
| product information | |
|---|---|
| container | 20 g or 2 kg |
| manufacturer | Permabond Engineering Adhesives Ltd |
| brand | Permabond |
| country of origin | Italy |
| Operating temperature (°C) | -55 to +120 |
| Storage temperature (°C) | 2-7 |
| Mechanical properties | |
|---|---|
| Hardness (Shore D) | 70-80 |
| Shear strength ISO ISO4587 in N/mm² | |
|---|---|
| steel | 12-17 |
| aluminum | 5-9 |
| polyvinyl chloride | 8-12 |
| ABS | 6-10 |
| Performance at ultimate strength | |
|---|---|
| Dielectric strength | 12 kV/mm |
| Uncategorized | |
|---|---|
| stainless steel | 14-19 |
| keywords | |
|---|---|
| keywords | |