Teroson MS 935 white (290 ml)

TEROSON MS 935 is a high-quality, single-component adhesive and sealant based on silane-modified polymers (SMP), which is characterized by high initial adhesion, very good UV resistance, and a wide range of applications in industry, vehicle construction, and trade. The product cures with air humidity to form a permanently elastic bond and is ideal for elastic bonding as well as seam and joint sealing in interior and exterior applications.

TEROSON MS 935 is free of solvents, silicones, PVC, and isocyanates and offers excellent adhesion to many substrates. Its high stability ensures that a stable bond is formed immediately after joining, often eliminating the need for additional fasteners. Thanks to its good paintability with common 1K and 2K systems, TEROSON MS 935 is ideal for visible applications.

Product features:

• 1-component SMP adhesive/sealant

• Sprayable, thixotropic, and highly viscous

• Networking through humidity

• Skin formation time: 5–20 minutes

• Curing: approx. 3 mm/24 h

• Shore A hardness: approx. 50

• Tensile strength: 2.8 MPa

• Elongation at break: approx. 230%

• Temperature resistance: -40 °C to +100 °C (briefly up to 120 °C)

• Free from silicone, isocyanate, PVC, and solvents

• Excellent UV and aging resistance

• Compatible with suitable coating systems

Suitable materials:

• Metals (e.g., steel, aluminum)

• Plastics (e.g., ABS, GRP – check suitability)

• Painted surfaces

• Wood, ceramics, and other solid substrates (after preliminary testing)

Typical areas of application:

• Vehicle and body construction

• Shipbuilding (e.g., boat plywood panels on steel floors)

• Railcar and container construction

• photovoltaic industry

• Air conditioning, ventilation, and electrical engineering

• Metal and equipment manufacturing

• Sealing of seams and joints inside and outside

Processing instructions:

1. The surface must be clean, dry, and free of grease.

2. Depending on the material, mechanical roughening or a primer may be necessary.

3. Processing at 5–40 °C with a hand-held or pneumatic gun (2–5 bar).

4. If necessary, bring to room temperature before application (to reduce viscosity).

5. Clean unhardened residues with Teroson A, D, or FL.

6. Can be painted over wet-on-wet with 1K/2K systems – own tests recommended.