Permabond TA 4605
documents
Internal reference:
49-4605.KT.G050
HS code:
49-4605.KT.G050
Description
PERMABOND® TA4605 is a two-component, reinforced acrylic adhesive with a 1:1 mix ratio. It has been specially designed for bonding low surface energy plastics such as polypropylene and polyethylene—no primer or surface preparation is required. This adhesive can also be used on a wide range of other materials, such as metals and composites, and is ideal for bonding dissimilar surfaces.
Suitable substrates
It bonds a wide range of materials:
- Plastics with low surface energy (polyolefins) in particular, e.g., polypropylene (PP), polyethylene (PE)
- metals
- composite materials
- Different surfaces
Advantages of Permabond® TA4610
- Rapid curing at room temperature
- No primer required
- High impact resistance
- Good resistance to chemicals
- Excellent water resistance (sticks underwater)
Note on surface pretreatment
For almost all materials, cleaning the surface is sufficient (except for aluminum, for example, which must first be roughened). If there are still traces of release agent on polyolefin plastics, these can be cleaned with Cleaner A before bonding and then dried.
product specifications
| Physical properties | |
|---|---|
| Color | Grayish white |
| Viscosity mPa·s | 1250000 |
| product information | |
|---|---|
| manufacturer | Permabond Engineering Adhesives Ltd |
| container | 50 ml |
| country of origin | Italy |
| mixing ratio | 1:1 |
| Processing time (pot life) at 25°C | 2-4 minutes |
| Storage temperature (°C) | 2-7 |
| Operating temperature (°C) | -55 to 100 |
| Shear strength ISO ISO4587 in N/mm² | |
|---|---|
| polypropylene | 5-8 N/mm² |
| polyethylene | 3-6 N/mm² |
| aluminum | 3-6 N/mm² |
| PTFE | 1.5 N/mm² |
| ABS | >4 N/mm² |
| polycarbonate | >5 N/mm² |
| polyvinyl chloride | >5 |
| EPDM | 3-5 N/mm² |
| PA6 | 3-5 N/mm² |
| curing values | |
|---|---|
| ultimate strength | 24 hours |
| Physical properties A | |
|---|---|
| Chemical group (A) | methacrylate |
| Color (A) | Grayish white |
| Viscosity (A) | 150,000–400,000 |
| Specific gravity (A) | 1.0 |
| UFI Part A | G8F0-Y01T-K00J-FMWN |
| Physical properties B | |
|---|---|
| Chemical group (B) | methacrylate |
| Color (B) | Colorless |
| Viscosity (B) | 20,000-30,000 |
| Specific gravity (B) | 1.0 |
| UFI Part B | KCF0-F0R6-W001-4YGQ |
| Properties of the bond | |
|---|---|
| Maximum gap filling capacity up to | 1.0 mm |
| Handling strength at 23°C | 20-25 minutes |
| Functional strength | 2-4 hours |
| keywords | |
|---|---|
| keywords | |