CAF 33 Transparent (11 oz)
documents
Internal reference:
40-306.KT
HS code:
39100000
CAF 33 Transparent – Silicone elastomer for versatile industrial applications
CAF 33 Transparent is a transparent, non-flowing silicone elastomer that cures at room temperature and offers impressive resistance to heat and chemicals. The transparent version is the ideal choice for applications requiring invisible, durable, and heat-resistant bonding, such as in electronics, the automotive industry, and general industry.
Special features:
- Heat resistance: Permanent resistance up to +250 °C, short-term resistance up to +300 °C – ideal for high-temperature environments.
- Chemical resistance: CAF 33 Transparent is resistant to aggressive substances such as oils and antifreeze agents, making it suitable for demanding industrial applications.
- Strong adhesion: Adheres reliably to metals, plastics, and ceramics, providing a durable and flexible bond.
- Water and moisture resistance: Perfect for environments that require constant moisture or wetness.
- Excellent insulation properties: The transparent version offers outstanding dielectric properties, making it ideal for electronic applications.
Areas of application:
- Industry: Ideal for seals and bonding in high-performance systems such as casting molds, pumps, and turbines.
- Electronics: Protects and insulates electrical components and provides an invisible, durable seal.
- Automotive industry: Used as an invisible sealant for sunroofs and as an insulator for electronic components.
Processing and application instructions:
CAF 33 Transparent is ready to use and is applied to a clean, dry surface. Installation should take place before the material forms a skin. Avoid placing any load on the components until the silicone has completely cured.
product specifications
| Physical properties | |
|---|---|
| Color | transparent |
| skin formation time | 6 min |
| Curing time for 2 mm layer thickness | 6 hours |
| nature | non-flowing paste |
| networking system | acetic acid |
| Flowability in mm | < 2 |
| extrusion | 50 g/min |
| density | 1.04 |
| Hardness (Shore A) | 25 |
| product information | |
|---|---|
| manufacturer | Elkem Silicones |
| container | 310 ml |
| tensile strength | 2.5 MPa |
| Operating temperature (°C) | -65 - 250 |
| Performance at ultimate strength | |
|---|---|
| elongation at break | 500% |
| tear resistance | 5.4 kN/m |
| Peak temperature (°C) | 300 |
| keywords | |
|---|---|
| keywords | |