Permabond TA 4620
MMA-Strukturklebstoff für Industrie-Anwendungen
MMA-Strukturklebstoff TA 4620 — Industrie-Strukturverklebung.
documents
Interne Referenz:
49-4620.KT
Permabond TA4620 ist ein 1:1 MMA-Strukturklebstoff.
Standard-Industrie-Strukturklebstoff.
MMA-Strukturklebstoff im 1:1-Verhältnis — Industrieklebung Standard.
Was Permabond TA 4620 auszeichnet
Wofür wird Permabond TA 4620 eingesetzt?
traitement
Empfohlenes Zubehör
Remarques importantes
Welcher Permabond-MMA-Strukturklebstoff für welche Anwendung?
Permabond TA 4620 im direkten Vergleich mit verwandten Produkten der TA-Reihe.
Permabond TA 4620 Aktuelles Produkt | Permabond TA 4610 → | Permabond TA 4630 → | Permabond TA 4246 → | |
|---|---|---|---|---|
| Utilisation | Strukturklebstoff MMA 1:1 | Comparable | Comparable | Boeing+Airbus |
| rapport de mélange | 1:1 Volumenteile | 1:1 | 1:1 | 10:1 |
| Handlingsfestigkeit | — | — | — | 2–4 min |
| Stahl-Scherfestigkeit | — | — | — | 33–35 N/mm² |
| Schälwiderstand | — | — | — | 150–180 N/25 mm |
Technische Daten zu Permabond TA 4620
| informations sur les produits | |
|---|---|
| fabricant | Permabond Engineering Adhesives Ltd |
| marque | Permabond |
| récipient | 50 ml, 400 ml |
| rapport de mélange | 1:1 |
| Temps de mise en œuvre (durée de vie en pot) à 25 °C | 10 à 14 minutes |
| Propriétés physiques A | |
|---|---|
| Groupe chimique (A) | méthacrylate |
| Couleur (A) | Gris-blanc |
| Viscosité (A) | 200 000-500 000 |
| Poids spécifique (A) | 1.0 |
| UFI Partie A | 8P01-Q05D-S000-RX6R |
| Propriétés physiques B | |
|---|---|
| Groupe chimique (B) | méthacrylate |
| Couleur (B) | Incolore |
| Viscosité (B) | 20 000-30 000 |
| Poids spécifique (B) | 1.0 |
| UFI Partie B | PS01-60UT-200H-E8ST |
| Performance à la résistance finale | |
|---|---|
| Résistance au cisaillement du polycarbonate | >5 N/mm² |
| Résistance au cisaillement PVC | >4 N/mm² |
| Propriétés du collage | |
|---|---|
| Capacité de remplissage maximale jusqu'à | 1,0 mm |
| Résistance à la manipulation à 23 °C | 60 à 90 minutes |
| Résistance fonctionnelle | 24 à 72 heures |
| Résistance finale à 23 °C | 7 jours |
| Propriétés physiques | |
|---|---|
| Viscosité mPa.s | 210000 |
| Scherfestigkeit ISO 4587 in N/mm² | |
|---|---|
| polypropylène | 3-5 N/mm² |
| aluminium | 3-6 N/mm² |
| PTFE | 1 N/mm² |
| ABS | >3 N/mm² |
| EPDM | 3-5 N/mm² |
| PA6 | 3-5 N/mm² |
| polyéthylène | 3-5 N/mm² |
| Propriétés thermiques | |
|---|---|
| Température de stockage (°C) | 2-7 |
| Température de fonctionnement (°C) | -55 à 100 |
Verbindliche Werte entnehmen Sie bitte dem technischen Datenblatt (TDS) im Tab "Dokumente".
Häufige Fragen zu Permabond TA 4620
Anwendungs- und Auslegungsfragen aus der Praxis — beantwortet von SILITECH.
MMA-Strukturklebstoff 1:1.
MMA-Strukturklebstoffe der TA-Reihe arbeiten typischerweise im No-Mix-Verfahren: Initiator auf eine Oberfläche, Klebstoff auf die andere — beim Zusammenfügen aktiviert der Initiator den Klebstoff. Mischverhältnis: 1:1 Volumenteile. Handlingsfestigkeit nach 2–10 Minuten, Endfestigkeit nach 24 Stunden bei 23 °C.
MMA-Strukturklebstoffe (Methylmethacrylat) bieten höhere Schlag- und Schälfestigkeit als klassische 2K-Epoxide — wichtig für dynamisch belastete Verklebungen. Die No-Mix-Verarbeitung mit separatem Initiator entfällt die Topfzeit-Limitierung. Aushärtezeit ist typischerweise schneller (Minuten statt Stunden).
Permabond TA 4620 verklebt typischerweise Metalle (Stahl, Aluminium), Composites (CFK, GFK) und Kunststoffe. Detailwerte siehe TDS.
Permabond TA 4620 hat keine spezifischen Aerospace-Zulassungen wie TA4246 (Boeing/Airbus). Für Industrieanwendungen ohne Luftfahrt-Anforderung ist das Produkt nach Permabond-Standards freigegeben.
Permabond TA 4620 ist Strukturklebstoff MMA 1:1 (1:1 Volumenteile Mix). Permabond TA 4610 ist Standard 1:1 (1:1) — Vergleichbar.
Aus der Permabond-MMA-Reihe: Permabond TA 4620 (Strukturklebstoff MMA 1:1); Permabond TA 4610 (Standard 1:1); Permabond TA 4630 (Standard 1:1); Permabond TA 4246 (Aerospace). Für Aerospace-Premium siehe TA4246 (Boeing+Airbus zugelassen). Für höchste Industrie-Festigkeit ohne Aerospace-Aufpreis siehe TA452.
Ihre Frage nicht dabei?
Unser Technik-Team berät Sie persönlich bei Materialauswahl, Verarbeitungsfragen und individuellen Anforderungen — schnell und kompetent.
spécifications du produit
| informations sur les produits | |
|---|---|
| récipient | 50 ml ou 400 ml |
| fabricant | Permabond Engineering Adhesives Ltd |
| marque | Permabond |
| rapport de mélange | 1:1 |
| Temps de mise en œuvre (durée de vie en pot) à 25 °C | 10 à 14 minutes |
| Propriétés physiques A | |
|---|---|
| Groupe chimique (A) | méthacrylate |
| Couleur (A) | Gris-blanc |
| Viscosité (A) | 200 000-500 000 |
| Poids spécifique (A) | 1.0 |
| UFI Partie A | 8P01-Q05D-S000-RX6R |
| Propriétés physiques B | |
|---|---|
| Groupe chimique (B) | méthacrylate |
| Couleur (B) | Incolore |
| Viscosité (B) | 20 000-30 000 |
| Poids spécifique (B) | 1.0 |
| UFI Partie B | PS01-60UT-200H-E8ST |
| Performance à la résistance finale | |
|---|---|
| Résistance au cisaillement du polycarbonate | >5 N/mm² |
| Résistance au cisaillement PVC | >4 N/mm² |
| Propriétés du collage | |
|---|---|
| Capacité de remplissage maximale jusqu'à | 1,0 mm |
| Résistance à la manipulation à 23 °C | 60 à 90 minutes |
| Résistance fonctionnelle | 24 à 72 heures |
| Résistance finale à 23 °C | 7 jours |
| Propriétés physiques | |
|---|---|
| Viscosité mPa.s | 210000 |
| Scherfestigkeit ISO 4587 in N/mm² | |
|---|---|
| polypropylène | 3-5 N/mm² |
| aluminium | 3-6 N/mm² |
| PTFE | 1 N/mm² |
| ABS | >3 N/mm² |
| EPDM | 3-5 N/mm² |
| PA6 | 3-5 N/mm² |
| polyéthylène | 3-5 N/mm² |
| Propriétés thermiques | |
|---|---|
| Température de stockage (°C) | 2-7 |
| Température de fonctionnement (°C) | -55 à 100 |
| mots clés | |
|---|---|
| mots clés | |
Dokumente und Datenblätter
Sicherheitsdatenblätter (SDS) und technische Datenblätter (TDS) zum Download: