Permabond TA 4620
MMA-Strukturklebstoff für Industrie-Anwendungen
MMA-Strukturklebstoff TA 4620 — Industrie-Strukturverklebung.
documentos
Interne Referenz:
49-4620.KT
Permabond TA4620 ist ein 1:1 MMA-Strukturklebstoff.
Standard-Industrie-Strukturklebstoff.
MMA-Strukturklebstoff im 1:1-Verhältnis — Industrieklebung Standard.
Was Permabond TA 4620 auszeichnet
Wofür wird Permabond TA 4620 eingesetzt?
Procesamiento
Empfohlenes Zubehör
Notas importantes
Welcher Permabond-MMA-Strukturklebstoff für welche Anwendung?
Permabond TA 4620 im direkten Vergleich mit verwandten Produkten der TA-Reihe.
Permabond TA 4620 Aktuelles Produkt | Permabond TA 4610 → | Permabond TA 4630 → | Permabond TA 4246 → | |
|---|---|---|---|---|
| Aplicación | Strukturklebstoff MMA 1:1 | Comparable | Comparable | Boeing+Airbus |
| proporción de mezcla | 1:1 Volumenteile | 1:1 | 1:1 | 10:1 |
| Handlingsfestigkeit | — | — | — | 2–4 min |
| Stahl-Scherfestigkeit | — | — | — | 33–35 N/mm² |
| Schälwiderstand | — | — | — | 150–180 N/25 mm |
Technische Daten zu Permabond TA 4620
| Información sobre el producto | |
|---|---|
| fabricante | Permabond Engineering Adhesives Ltd |
| marca | Permabond |
| envase | 50 ml, 400 ml |
| proporción de mezcla | 1:1 |
| Tiempo de procesamiento (tiempo de vida útil) a 25 °C | 10-14 minutos |
| Propiedades físicas A | |
|---|---|
| Grupo químico (A) | metacrilato |
| Color (A) | Blanco grisáceo |
| Viscosidad (A) | 200 000-500 000 |
| Peso específico (A) | 1.0 |
| UFI Parte A | 8P01-Q05D-S000-RX6R |
| Propiedades físicas B | |
|---|---|
| Grupo químico (B) | metacrilato |
| Color (B) | Incoloro |
| Viscosidad (B) | 20 000-30 000 |
| Peso específico (B) | 1.0 |
| UFI Parte B | PS01-60UT-200H-E8ST |
| Rendimiento con resistencia final | |
|---|---|
| Resistencia al cizallamiento del policarbonato | >5 N/mm² |
| Resistencia al cizallamiento PVC | >4 N/mm² |
| Propiedades del encolado | |
|---|---|
| Capacidad máxima de relleno de huecos hasta | 1,0 mm |
| Resistencia al manejo a 23 °C | 60-90 minutos |
| Resistencia funcional | 24-72 horas |
| Resistencia final a 23 °C | 7 días |
| Propiedades físicas | |
|---|---|
| Viscosidad mPa.s | 210000 |
| Scherfestigkeit ISO 4587 in N/mm² | |
|---|---|
| polipropileno | 3-5 N/mm² |
| aluminio | 3-6 N/mm² |
| PTFE | 1 N/mm² |
| ABS | >3 N/mm² |
| EPDM | 3-5 N/mm² |
| PA6 | 3-5 N/mm² |
| polietileno | 3-5 N/mm² |
| Propiedades térmicas | |
|---|---|
| Temperatura de almacenamiento (°C) | 2-7 |
| Temperatura de funcionamiento (°C) | -55 a 100 |
Verbindliche Werte entnehmen Sie bitte dem technischen Datenblatt (TDS) im Tab "Dokumente".
Häufige Fragen zu Permabond TA 4620
Anwendungs- und Auslegungsfragen aus der Praxis — beantwortet von SILITECH.
MMA-Strukturklebstoff 1:1.
MMA-Strukturklebstoffe der TA-Reihe arbeiten typischerweise im No-Mix-Verfahren: Initiator auf eine Oberfläche, Klebstoff auf die andere — beim Zusammenfügen aktiviert der Initiator den Klebstoff. Mischverhältnis: 1:1 Volumenteile. Handlingsfestigkeit nach 2–10 Minuten, Endfestigkeit nach 24 Stunden bei 23 °C.
MMA-Strukturklebstoffe (Methylmethacrylat) bieten höhere Schlag- und Schälfestigkeit als klassische 2K-Epoxide — wichtig für dynamisch belastete Verklebungen. Die No-Mix-Verarbeitung mit separatem Initiator entfällt die Topfzeit-Limitierung. Aushärtezeit ist typischerweise schneller (Minuten statt Stunden).
Permabond TA 4620 verklebt typischerweise Metalle (Stahl, Aluminium), Composites (CFK, GFK) und Kunststoffe. Detailwerte siehe TDS.
Permabond TA 4620 hat keine spezifischen Aerospace-Zulassungen wie TA4246 (Boeing/Airbus). Für Industrieanwendungen ohne Luftfahrt-Anforderung ist das Produkt nach Permabond-Standards freigegeben.
Permabond TA 4620 ist Strukturklebstoff MMA 1:1 (1:1 Volumenteile Mix). Permabond TA 4610 ist Standard 1:1 (1:1) — Vergleichbar.
Aus der Permabond-MMA-Reihe: Permabond TA 4620 (Strukturklebstoff MMA 1:1); Permabond TA 4610 (Standard 1:1); Permabond TA 4630 (Standard 1:1); Permabond TA 4246 (Aerospace). Für Aerospace-Premium siehe TA4246 (Boeing+Airbus zugelassen). Für höchste Industrie-Festigkeit ohne Aerospace-Aufpreis siehe TA452.
Ihre Frage nicht dabei?
Unser Technik-Team berät Sie persönlich bei Materialauswahl, Verarbeitungsfragen und individuellen Anforderungen — schnell und kompetent.
Especificaciones del producto
| Información sobre el producto | |
|---|---|
| envase | 50 ml o 400 ml |
| fabricante | Permabond Engineering Adhesives Ltd |
| marca | Permabond |
| proporción de mezcla | 1:1 |
| Tiempo de procesamiento (tiempo de vida útil) a 25 °C | 10-14 minutos |
| Propiedades físicas A | |
|---|---|
| Grupo químico (A) | metacrilato |
| Color (A) | Blanco grisáceo |
| Viscosidad (A) | 200 000-500 000 |
| Peso específico (A) | 1.0 |
| UFI Parte A | 8P01-Q05D-S000-RX6R |
| Propiedades físicas B | |
|---|---|
| Grupo químico (B) | metacrilato |
| Color (B) | Incoloro |
| Viscosidad (B) | 20 000-30 000 |
| Peso específico (B) | 1.0 |
| UFI Parte B | PS01-60UT-200H-E8ST |
| Rendimiento con resistencia final | |
|---|---|
| Resistencia al cizallamiento del policarbonato | >5 N/mm² |
| Resistencia al cizallamiento PVC | >4 N/mm² |
| Propiedades del encolado | |
|---|---|
| Capacidad máxima de relleno de huecos hasta | 1,0 mm |
| Resistencia al manejo a 23 °C | 60-90 minutos |
| Resistencia funcional | 24-72 horas |
| Resistencia final a 23 °C | 7 días |
| Propiedades físicas | |
|---|---|
| Viscosidad mPa.s | 210000 |
| Scherfestigkeit ISO 4587 in N/mm² | |
|---|---|
| polipropileno | 3-5 N/mm² |
| aluminio | 3-6 N/mm² |
| PTFE | 1 N/mm² |
| ABS | >3 N/mm² |
| EPDM | 3-5 N/mm² |
| PA6 | 3-5 N/mm² |
| polietileno | 3-5 N/mm² |
| Propiedades térmicas | |
|---|---|
| Temperatura de almacenamiento (°C) | 2-7 |
| Temperatura de funcionamiento (°C) | -55 a 100 |
| Palabras clave | |
|---|---|
| Palabras clave | |
Dokumente und Datenblätter
Sicherheitsdatenblätter (SDS) und technische Datenblätter (TDS) zum Download: