Permabond
Permabond Engineering Adhesives has been a leader in adhesive technology for industrial applications for over 25 years. Under the term HIGH PERFORMANCE ADHESIVES are the following product groups:
- Anarobic Adhesives For vibration-resistant and tight joints in mechanical and automotive engineering.
- One- and two- Component Expoxydsystems Polymer-reinforced and impact-resistant compounds with good chemical resistances find a wide range of applications such as in the manufacture of electric motors, household appliances, machine tools.
- Reinforced Acrylate Adhesives Minute, structural bonding, structural bonding.
- einforced Acrylate Adhesives Minute, constructive joints and structural bonding.
- Cyanoacrylate Adhesives Latest generation for joints in seconds in the field of elastomers, plastics, metal and iron.
- UV Adhesives are used in loudspeakers, electric motors, glass and plastic bonding, electric plug connections, sieves, ammunition sealing, propellant cables for airbags, cable fixing, decorative articles.
- Special Adhesives for Medical Technology Needle bonding, sealing of cannulas, plastic containers, etc.
Permabond Adhesives Guide Pre-treatment of substrates Which adhesive for which substrate?s Selection Table Anaerobic Adhesives Screw Locks Selection Table Acrylic Adhesives Selection Table 2-Component Epoxy Selection Table 1-K Epoxy Selection Table UV Adhesives Selection Table Medical Adhesives
PERMABOND® 820 is a low viscosity modified ethyl cyanoacrylate suitable for applications where high temperature resistance is required. This material is fast setting and has good adhesion to rubber, metal and plastics.
Read morePERMABOND® 910 is the original 100%-methyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts. PERMABOND® 910 will cure to a fixture strength in 10 seconds on most surfaces and strength develops rapidly. The adhesive was designed specifically for…
Read morePERMABOND® 920 is the original allyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts. PERMABOND 920 will cure to fixture strength in 10 seconds on most surfaces, and rapidly develops high strength with full cure obtained in 24…
Read morePERMABOND® 940 is a low odour, non-fogging, non-frosting alkoxyethyl cyanoacrylate. The reduced odour improves worker comfort. Unsightly fogging adjacent to bondlines, common with other cyanoacrylate adhesives on hot and humid days, is eliminated. The elimination of fogging improves the production rate of acceptable parts as well as their appearance.
Read morePERMABOND® 941 is a low odour, non-fogging, non-frosting alkoxyethyl cyanoacrylate. The reduced odour improves worker comfort. Unsightly fogging adjacent to bondlines, common with other cyanoacrylate adhesives on hot and humid days, is eliminated. The elimination of fogging improves the production rate of acceptable parts as well as their appearance.
Read morePERMABOND® 943 is a low odour, non-fogging, non-frosting alkoxyethyl cyanoacrylate. The reduced odour improves worker comfort. Unsightly fogging adjacent to bondlines, common with other cyanoacrylate adhesives on hot and humid days, is eliminated. The elimination of fogging improves the production rate of acceptable parts as well as their appearance.
Read morePERMABOND® 2010 is a thixotropic, fast-setting cyanoacrylate adhesive particularly suitable for use on vertical and porous substrates. This material can be used on metals, plastics, elastomers, ceramics and wood.
Read morePERMABOND® 791 is a low viscosity, surface insensitive adhesive that will rapidly bond substrates with acidic surfaces such as wood and plated surfaces. Plastics, metals, ceramics and elastomers are also rapidly bonded. The fast cure minimizes the occurrence of frosting and fogging.
Read morePERMABOND® 792 is a low viscosity, surface insensitive adhesive that will rapidly bond substrates with acidic surfaces such as wood and plated surfaces. Plastics, metals, ceramics and elastomers are also rapidly bonded. The fast cure minimizes the occurrence of frosting and fogging.
Read morePERMABOND® 801 is a low viscosity modified ethyl cyanoacrylate suitable for applications where high temperature resistance is required. This material is fast setting and has good adhesion to rubber, metal and plastics.
Read more